Racequip Helmet Visor

Everything You Need to Know Before Getting a Visor for Your Racing Helmet

As an avid racing enthusiast, having the right gear is crucial for performance and safety. One of the most important pieces of equipment is a high-quality helmet visor. After all, you need to be able to see clearly at high speeds!

That’s why I always recommend Racequip helmet visors to fellow racers. Racequip is one of the top brands for racing gear, and their visors offer superb optical clarity and durability. In this comprehensive buying guide, I’ll tell you everything you need to know about Racequip visors so you can find the perfect one for your needs.

What Exactly is a Racequip Helmet Visor?

A Racequip visor is a curved piece of impact-resistant polycarbonate or acrylic that attaches to the front of a racing helmet. It protects the eyes and face from debris, insects, and other hazards while driving at high speeds.

Racequip offers visors in a wide range of tints, sizes, and materials to suit different racing needs. Their visors are designed specifically for motorsports use, with features like scratch resistance, anti-fog coatings, and optical clarity.

Step-by-Step: Installing a Racequip Visor

Putting on a new Racequip visor is a quick and easy process. Here are the basic installation steps:

1. Remove the existing visor screws and old visor from your helmet. Make sure the helmet surface is clean.
2. Position the new visor so the holes align with the visor screws on the helmet.
3. Insert the screws through the visor holes and tighten them into the helmet. Don’t overtighten!
4. Adjust the visor angle to your preference. Most helmets have multiple angle settings.

It should only take a few minutes to swap out the visors. Just be careful not to overtighten the screws and crack the visor. Taking the time to properly install your Racequip visor will ensure optimal visibility and protection.

Keeping Fog at Bay: Racequip’s Anti-Fog Technology

As a competitive racer, I absolutely hate when my helmet visor fogs up. Not being able to see is incredibly dangerous at high speeds. That’s why I only use visors with anti-fog technology, like those made by Racequip.

Racequip visors feature a special anti-fog coating that prevents moisture buildup inside your helmet. This keeps your vision crystal clear lap after lap, even in wet conditions. The anti-fog film is applied evenly during the manufacturing process to maximize visibility.

I’ve tested my Racequip visors in all sorts of humid and rainy conditions and never had any issues with fog or condensation. The anti-fog properties really work! Having this reliability allows me to focus on racing fast rather than worrying about my vision.

Where to Buy Genuine Racequip Visors

So where can you pick up Racequip visors for your helmet? I recommend buying directly from authorized Racequip dealers or retailers to ensure you’re getting an authentic product.

Top places to buy real Racequip visors include:

• Directly from Racequip.com
• Racing specialty stores like Jegs, Summit Racing, and more
• Amazon from the official Racequip store
• Racequip sellers on eBay and other sites

Just be wary of counterfeit visors from unknown sellers that try to mimic the Racequip name and branding. Stick with reputable sources and you’ll get a genuine Racequip visor every time. The quality and performance is worth it!

How Racequip Visors Stack Up Against Other Brands

As one of the leading racing gear brands, Racequip stands out from competitors in a few key ways:

• Optical clarity – Racequip visors use high quality polycarbonate and proprietary treatments for minimal distortion. Many cheaper brands have visible imperfections.
• Durability – They can withstand hundreds of hours of high-speed racing without cracking or pitting. Lesser quality visors get scratched and damaged quickly.
• Anti-fog technology – Racequip’s exclusive anti-fog film is incredibly effective compared to basic visor coatings from other companies.
• Fit and finish – Precise manufacturing ensures an exact fit with popular helmet models and clean visor edges.
• UV protection – Special coatings block harmful ultraviolet light without altering color perception.

While there are other decent visor brands available, I’ve found none match the clarity, reliability, and longevity of my Racequip visors. The unobstructed vision and durability are crucial for safe racing.

Polycarbonate and Acrylic: Visor Materials

Racequip offers helmet visors made from either polycarbonate or acrylic. Both materials are strong and impact-resistant, but they have some differences:

• Polycarbonate is the most common option. It’s extremely durable against cracks and scratches. Optical quality is quite good too.
• Acrylic is lighter, but more prone to scratching. It offers the clearest optics though not quite as impact-resistant.
• Polycarbonate has better UV-blocking qualities, especially combined with Racequip’s coatings.

For most racers, polycarbonate is preferred for the added impact protection and scratch resistance. But acrylic visors provide the ultimate in visual clarity and light weight. It depends if you prioritize optics or resilience. Both materials work great, so choose what fits your racing needs.

Keeping Your Visor Clean: Maintenance Tips

Don’t ruin the visibility of your Racequip visor with dirt and grime!

Here are my top tips for cleaning and caring for your helmet visor:

• Rinse with clean water after each use to prevent dirt buildup and staining
• Apply a mild soap and lukewarm water using a soft cloth to remove stuck-on particles
• Never use abrasive cleaners or cloths which can scratch the visor surface
• Wipe gently in a circular motion and rinse off all soap residue after cleaning
• Use a specially-formulated anti-fog or visor cleaner/polish to revitalize the coatings
• Store the visor in a helmet bag or protective case to prevent scratches

Take proper care of your Racequip visor and the optical clarity will last for many races and years to come! Avoid harsh chemicals or abrasives that damage the coatings and degrade visibility.

Sizing Options for All Helmet Models

Racequip engineers their visors to fit a wide range of popular racing helmet brands and sizes. They offer specific visor shapes for different helmets.

Some of the common Racequip visor sizes and applications include:

• 7 3⁄4” shields for many open face helmets
• 8” oval shields fitting Bell, GPA, Zamp, and other brands
• 14” flat shields for off-road models like those from Simpson and MSR
• 16” and 18” extra large flat shields used on dirt bike helmets

With precisely pre-curved shapes for major helmet makes, you can easily find a Racequip visor that will match your existing headgear. Contact them or check your helmet user manual if you need help choosing the correct visor size. Proper fit is essential for protection and aerodynamics.

Visor Costs: A Reasonable Racing Investment

Considering their quality and performance, Racequip visors are very reasonably priced. They range from about $15 up to $150 depending on:

• Size – Larger visors use more material and cost more
• Shape – Complex and precise curvature increases price
• Material – Acrylic is slightly pricier than polycarbonate
• Tint – Mirrored finishes are the most expensive

You might find cheaper visors, but as they say, you get what you pay for. With Racequip, you get excellent optics, fit, and durability for a fair cost. Having a clear view of the track is worth the investment for your safety. Don’t skimp on your visor quality and end up with visibility problems on the track.

Tinted Visor Options for Variable Lighting Conditions

Racing in different conditions means dealing with changing light levels. Racequip offers helmet visors in a range of tints to optimize visibility:

• Clear – Maximum light transmission for night races or low light. Avoid if extremely sensitive to normal daylight.
• Light or medium tint – Good general purpose for average lighting. Light smoke or grey reduce glare.
• Dark tint – Significant glare reduction for very bright sunlight. Amber and dark smoke preserve contrast well.
• Mirrored – Reflective coatings further cut glare. Popular for daytime events. Iridescent and gold mirror finishes look cool too!
• Transition – Photochromic lenses automatically adjust between light and dark. Convenient but more expensive.

Consider when, where, and what you’ll be racing to determine the ideal tint. I like to keep a lightly tinted and mirrored Racequip visor handy for flexibility. Switching out visors takes just seconds before each race.

Step-by-Step: How to Replace Your Racequip Visor

Over time, your helmet’s visor will get scratched up and need replacement. Here’s a quick guide to swapping in a fresh Racequip visor:

1. Remove the old visor completely by taking out all the visor screws.
2. Clean the helmet surface of any debris, grease, etc. so the new visor can mount flush.
3. Position the new Racequip visor so the pre-drilled holes line up with the helmet’s screw holes.
4. Insert all screws through the visor holes and tighten down gently until snug. Don’t overtighten!
5. Adjust the visor angle and close position. Make sure it raises, lowers, and locks properly.

That’s all there is to it! In just a few minutes you can install a new visor for a clear view of the track ahead. Taking the time to correctly replace your Racequip visor ensures the best fit and optical performance.

Scratch-Resistant Technology for Longer Visor Life

As a professional racer, I’m really tough on my helmets and visors. Even the slightest imperfection in the vision area is distracting and potentially dangerous when driving 200mph. That’s why I only use Racequip’s scratch-resistant visors.

Racequip applies an exclusive coating during manufacturing that makes their visors extremely resistant to scratches and abrasions. This protects the optical clarity for much longer compared to cheap brands that scratch easily.

Combined with the durable polycarbonate or acrylic material, a Racequip visor can withstand hundreds of hours of racing without showing significant signs of wear. The scratch protection really preserves visibility when you consider all the dirt, dust, and debris that gets thrown at your helmet in the midst of intense racing action.

While they’re not fully scratch-proof, I’ve been amazed at how few signs of wear my Racequip visors show after lots of hard racing. The vision stays crystal clear thanks to the scratch-resistant technology.

Achieving a Perfect Fit on Any Helmet

One common concern I hear from fellow racers is whether an aftermarket visor will properly fit their existing helmet model. Installation isn’t straightforward if the curvature and angles don’t align correctly. No one wants a visor that leaves gaps or optical distortion!

Fortunately, Racequip uses precise digital scanning and advanced manufacturing to create visors shaped specifically for today’s most popular racing helmets. As long as you get the right size and style visor for your helmet brand, Racequip’s products install easily and achieve a perfect flush fit.

I’ve mounted their visors on Bell, Simpson, Stilo, Arai, and many other helmets without any issues. Just take care not to overtighten the screws to avoid cracking the visor. With the right Racequip visor for your particular helmet, you’ll enjoy clear vision and protection at speed.

Visor Color Options for Style and Performance

A major benefit of Racequip’s extensive visor lineup is the wide range of lens colors available. Beyond tints, they offer visors in various colors to suit your style:

• Clear – Maximum light for night racing. Avoid if light sensitive.
• Smoke – Light, medium, and dark smoke tints reduce glare in sun.
• Yellow – Enhances contrast in low light like overcast or twilight conditions.
• Blue – Can improve visibility in flat lighting. Also a stylish color choice.
• Gold, blue, pink, and green iridium – Mirrored coatings reflect glare. Gold is great for day races.
• Chrome – Mirror finish looks cool but isn’t legal for most sanctioned events.

The possibilities are nearly endless! Match the lens color to the lighting conditions where you’ll be driving for the best vision performance. Or choose based on style alone if that’s your thing. Either way, Racequip has you covered.

Meet Certification Requirements for Safety

To legally compete in most racing events, your helmet and visor must meet strict certification standards. Racequip visors are designed to comply with various racing sanctioning body regulations.

For example, nearly all their clear and tinted visor options meet SCCA requirements for sports car road racing. Models made from 1.5mm polycarbonate with anti-scratch and anti-fog coatings are certified for professional use.

Racequip also produces visors compliant for motorcycle and karting applications. Certain youth racing series prohibit overly dark tints for visibility. Check your racing association’s guidelines and choose an approved Racequip model. Never take chances with unrated discount visors. Racequip is trusted at the highest levels of motorsport.

The Importance of Optimal Vision on the Track

As experienced racers know, being able to clearly see the track, cars around you, and upcoming turns is absolutely crucial. Vision problems are extremely dangerous at high speeds. Just a few reasons proper optics matter:

• Identify the driving line, brake markers, and other visual cues
• See and respond faster to competitors around you
• Detect debris, oil, water, or other hazards on the racing surface
• Judge speeds and distances accurately for braking and turning
• Avoid disorientation, dizziness, and eye fatigue

That’s why I’m so adamant about using a high quality visor like Racequip’s instead of a cheaper brand. The optical clarity and durability gives you the vision you need lap after lap. Don’t risk your safety or finishing position with subpar optics.

Visor Reviews From Real Racecar Drivers

Don’t just take my word when it comes to Racequip visors – see what fellow drivers and racers are saying:

“These Racequip visors are superb. Crystal clear optics and they stay fog-free. I’ve used them for 5 seasons now without issues.”

“Racequip’s anti-scratch coating is excellent. They last far longer than other brands before getting scratched up.”

“I like the dark tints for racing in bright conditions. The amber lenses really help with contrast too. Just great quality all around.”

“I’ve used Racequip visors on several different helmet brands now. Always a perfect fit with no gaps or wind noise.”

The overwhelming consensus from Real racers is that Racequip delivers on durability, optical clarity, anti-fog performance, and fit. That matches my own experience using their visors for many years and miles on the track.

Why Racequip Visors Are My Top Choice

After testing numerous helmet visors over my racing career, I consider Racequip to be the clear leader. Here’s why they continue to earn the top spot in my gear bag:

• Proven durability – Their scratch and impact resistance means visors last multiple seasons. Lesser brands break easily.
• Reliable anti-fog technology – I’ve never had issues with fogging even in extremely humid conditions.
• Precision manufacturing – Visors install perfectly on major helmet brands and stay securely in place.
• Excellent optical clarity – Visibility and contrast is sharp with minimal distortion. Critical for safety.
• Extensive options – Racequip offers visors for almost any racing application and in every tint.
• Fair pricing – More expensive than discount brands but very reasonable for authentic racing-grade polycarbonate visors.
• Trusted by top racers – Racequip is the choice of professionals worldwide who demand the best quality.

For everything from club racing to NASCAR, Racequip remains my first choice for helmet visors. Investing just a bit more gives me superior optics, reliability, and protection.

Expect Years of Use from Each Visor

Unlike cheap visors that only last one or two seasons before needing replacement, Racequip’s polycarbonate models can endure several years of hard racing use when cared for properly.

With my last few Racequip visors, I’ve easily gotten 4+ years of racing out of each one thanks to the durability. The anti-scratch and anti-fog coatings maintain excellent clarity year after year. I also take care to gently clean and store them after each event.

While extremely scratched or damaged visors should get replaced immediately, normal Racequip visors will stand up to extended use. The longevity saves money compared to constantly buying new cheap visors that break or cloud up quickly.

Of course, always inspect your visor before each race and replace it if vision is impaired. But a quality Racequip visor treated with care will protect your eyes for many miles on the track. The long service life is worth the additional cost.

Withstanding All Racing Conditions

As a racer, I’ve experienced just about every weather condition possible during events – brutal sun, pouring rain, dark nights, and everything in between. My Racequip visors have endured it all and kept my vision clear.

The polycarbonate material and specialized coatings allow Racequip visors to perform in diverse racing conditions:

• Anti-fog film prevents hazing even in downpours.
• Water-resistant lenses repel raindrops at speed.
• Scratch protection for all that gritty dust and dirt getting flung off cars.
• UV protection when driving under intense sunlight.
• Amber and yellow tints for low light or overcast days.
• Clear options let maximum light through for night events.

No matter the forecast, I have confidence in my Racequip visors. Combined with multiple tint choices, I can adapt my vision for all sorts of driving environments. Don’t let weather be an excuse – Racequip’s got you covered!